DENTCA-4 - Complete (Upper & Lower)

Price: 
$6,000.00

The simplest and most powerful solution for CAD/CAM full mouth restorations! DENTCA-4 utilizes DENTCA's state-of-the-art CAD/CAM software with custom-angled, segmented Titanium bar design. Final restoration can be in Zirconia or PMMA. - Simplify the clinical process chair side and provide your patients with the best prosthesis to date.

 

M I N I M U M    R E Q U I R E M E N T S

4-6 implants per arch

(a minimum of 2 implants on each side of the arch)

Bone level implants

6.5mm of interarch space for single arch cases

13mm interarch space for complete cases

7mm space from the center of one implant to the next implant
All internal hex impants from major companies are supported

 

Order Information
(your patient #, account#, or case #, if applicable)
(patient initials should be entered so that you or your staff can identify the patient)



Input patient photo reference number or upload it manually
x
Drop files here to upload
Files must be less than 1000 MB.
Allowed file types: jpg jpeg png.
Please choose whether you want to receive a Try-in or go directly to Final. * If this is your first case, you will receive a try-in denture first before going to final regardless of your case type selection.
(note: extreme cases may not be able to be designed to desired anterior overjet)
(If different sizes were used for the maxillary and mandibular arches, enter the smaller of the two.)
(If Mixed, specify under the implant brand if external or internal for each bar.)
ex: 3.5 x 8.0 (diameter x length, mm)
ex: 3.5 x 8.0 (diameter x length, mm)
(Leave blank for same brand)
ex: 3.5 x 8.0 (diameter x length, mm)
(Leave blank for same brand)
ex: 3.5 x 8.0 (diameter x length, mm)
(Leave blank for same brand)
ex: 3.5 x 8.0 (diameter x length, mm)
(Leave blank for same brand)
ex: 3.5 x 8.0 (diameter x length, mm)
(Leave blank for same brand)
ex: 3.5 x 8.0 (diameter x length, mm)
(Leave blank for same brand)
ex: 3.5 x 8.0 (diameter x length, mm)
(Leave blank for same brand)
ex: 3.5 x 8.0 (diameter x length, mm)
(Leave blank for same brand)
ex: 3.5 x 8.0 (diameter x length, mm)
(Leave blank for same brand)
ex: 3.5 x 8.0 (diameter x length, mm)
(Leave blank for same brand)
ex: 3.5 x 8.0 (diameter x length, mm)
(Leave blank for same brand)

Scan Upload
1. CBCT DICOM (CBCT files must be zipped before uploading) or Bite STL Scan file
2. Implant-level 3D digital impression STL impression file (Single Arch - Maxillary or Mandibular / Complete - Both)
3. SA - Opposing stone scan STL
x
Drop files here to upload
Files must be less than 1000 MB.
Allowed file types: stl obj zip dcm jpg 3oxz.