DENTCA Try-in for Carbon printers – 1kg
The DENTCA Try-In resin is an FDA cleared biocompatible photocurable material. Intended for the printing of evaluation Try-in Denture models that the dentist can use to evaluate cases prior to final dentures.
The Dentca Try-in resin only comes in one available shade, which is simlar to teeth color.
Recommended Equipment: Carbon 3D Post Curing Unit - Coming soon...
Available only in 1kg presentation
|Viscosity at 25 +/- 0.5 °C||cps||1000 < x < 2000|
|Density||g/cm3||1.05 < x < 1.20|
|Density||g/cm3||1.15 < x < 1.25|
|Degree of Conversion||%||>70|
Download the Direction for Use (Coming Soon)
For specific questions about your Carbon printer or Carbon software settings used for this resin, please contact Carbon directly at firstname.lastname@example.org